Pendulum Valve (Normal Closed type)
Specification
| GATE SEAL TYPE | PENDULUM VALVE | Pressure Range | 1 x 10-9 mbar to 1.4 bar (abs) |
|---|---|---|---|
| Operation | Pneumatic | Differential pressure on the gate | ≤1.4 bar in either direction |
| Flange Size | 8”~22” | Temperature for Valve Body & Gate | ≤ 200℃ Stainless, ≤ 150℃ Aluminum |
| Material | Valve Body : Al6061 I Gate : SUS304 I Bonnet & Actuator : Al6061 I Feedthrough : Rotary Feedthrough / STS304 | Temperature for Actuator | ≤ 70℃ |
| Sealing Material | Gate : Viton O-Ring I Valve Seat : Viton O-Ring I Bonnet : Viton O-Ring I Rotary Feedthrough Shaft : Viton O-Ring | First Cycles until First Service | Welded Bellows : Less than 200,000 Cycles Shaft, O-Ring : N/A |
| Response Time | ≤ 4 sec | Open/Close Vibration | No Vibration |
| Actuator | Air Cylinder | Mounting Position | Any |
| Leak rate (Body, Seat) | 1×10-9 mbar ℓ/sec | Operating Pressure Compressed Air or N2 | 4 ~ 7 kgf/cm2 |
Pendulum Valve (Normal Closed type) サイズおよび図面ついて
下記より別途お問い合わせください
お気軽にお問い合わせください
TEL.
03-3456-2577