Heating Pendulum Valve
Specification
| GATE SEAL TYPE | Pendulum Valve | Leak rate (Hard Anodized Aluminum) | 1×10-4 mbar ℓ/Sec |
|---|---|---|---|
| Operation | Stepper Motor | Operate Pressure Range (Aluminum) | 1 × 10-8 mbar to 1200 mbar (abs) |
| Flange Size (ID) Sealing | 4"~ 12" | Operate Pressure Range (Hard Anodized Aluminum) | 1 × 10-6 mbar to 1200 mbar (abs) |
| Flange Type | ISO-F, JIS | Cycles until First Service | Pressure Control 1,000,000 / Closing, Opening 200,000 |
| Gate Seal | Viton O-Ring/Kalrez O-ring/EPDM | Temperature for Valve Body | ≤ 120℃ Standard, 150 & ≤ 200℃ Optional |
| Bonnet Seal | Viton O-ring | Temperature for Actuator | ≤ 60℃ |
| Response Time | 3/4(12"5/6)sec | Materials | Aluminum or Hard Anodized |
| Differential Pressure at Opening | ≤ 10 mbar | Mounting Position | Any |
| Differential Pressure on the Gate | ≤1.2bar | Interface | Analog, RS232, RS485, DeviceNet, Ethercat |
| Leak rate (Aluminum) | 1×10-9mbar ℓ/Sec |
Heating Pemdulum Valve 도면
별도 문의 부탁드립니다
